Sicce Syncra Silent Submersible Pumps establish a premium benchmark for silent, dependable performance in modern aquariums, sumps, and water features. Engineered with a synchronous motor block and an advanced internal recirculation system, these heavy-duty utility pumps run incredibly cool while drawing minimal electricity. They are designed for both fully submerged underwater filtration setups and external inline plumbing configurations. Featuring a step-less mechanical flow regulator on the front intake screen, they allow you to fine-tune your aquarium's turn-over rate with absolute precision.
Key benefits:
Near-Silent Operation: Built with premium sound-dampening feet and a balanced impeller assembly to reduce operational noise to a whisper.
Submerged or Dry Configurations: Rated for internal underwater installation or external inline plumbing applications.
Built-in Mechanical Flow Control: Features a front-mounted dial that makes adjusting your water flow simple and intuitive.
Cool-Running Efficiency: Engineered to run cold, preventing any unwanted heat transfer to your sensitive aquatic environment.
Specifications:
Form: Submersible or inline synchronous utility pumps
Impeller Type: High-efficiency ceramic shaft assembly
Water type: Freshwater and Saltwater
Intended users: Sump operators, media reactor users, and custom aquarium aquarists
Available Variants:
Syncra Silent 1.0: 251 GPH | 4.9 Ft. Max Head | 16 Watts | 1/2" Inlet/Outlet
Syncra Silent 1.5: 357 GPH | 5.9 Ft. Max Head | 23 Watts | 1/2" Inlet/Outlet
Syncra Silent 5.0: 1321 GPH | 12.5 Ft. Max Head | 105 Watts | 1" Inlet/Outlet
Suggested use:
Submerged Setup: Attach the rubber isolation feet, place the pump on the bottom of your chamber, adjust the front dial to your required flow rate, and plug it in.
Inline Setup: Unsnap the front flow regulator plate, thread your custom intake plumbing line directly onto the exposed male intake port, and secure your discharge hose.
Storage and safety:
Always isolate the pump from the main electrical outlet before maintaining internal parts or reaching into the water.
Regularly pull the impeller assembly out to clean away debris and clear away organic sludge.
Warnings:
Do not allow the pump to run dry or operate without water passing through the volute.
Ensure the front utility casing is securely locked in place before turning on the power.
What’s included:
1 x Sicce Syncra Silent Pump (of selected variant)
1 x Adjustable Front Intake Volume Plate
2 x Threaded Hose Barb Connectors
4 x Vibration-Isolating Rubber Cushion Feet
Why choose:
When background noise is a dealbreaker, the Italian-engineered Sicce Syncra Silent series delivers. It gives you the flexible plumbing choices, mechanical adjustments, and energy-saving performance you need, all without the noisy hum of standard utility pumps.
Sicce Syncra Silent Submersible Pumps establish a premium benchmark for silent, dependable performance in modern aquariums, sumps, and water features. Engineered with a synchronous motor block and an advanced internal recirculation system, these heavy-duty utility pumps run incredibly cool while drawing minimal electricity. They are designed for both fully submerged underwater filtration setups and external inline plumbing configurations. Featuring a step-less mechanical flow regulator on the front intake screen, they allow you to fine-tune your aquarium's turn-over rate with absolute precision.
Key benefits:
Near-Silent Operation: Built with premium sound-dampening feet and a balanced impeller assembly to reduce operational noise to a whisper.
Submerged or Dry Configurations: Rated for internal underwater installation or external inline plumbing applications.
Built-in Mechanical Flow Control: Features a front-mounted dial that makes adjusting your water flow simple and intuitive.
Cool-Running Efficiency: Engineered to run cold, preventing any unwanted heat transfer to your sensitive aquatic environment.
Specifications:
Form: Submersible or inline synchronous utility pumps
Impeller Type: High-efficiency ceramic shaft assembly
Water type: Freshwater and Saltwater
Intended users: Sump operators, media reactor users, and custom aquarium aquarists
Available Variants:
Syncra Silent 1.0: 251 GPH | 4.9 Ft. Max Head | 16 Watts | 1/2" Inlet/Outlet
Syncra Silent 1.5: 357 GPH | 5.9 Ft. Max Head | 23 Watts | 1/2" Inlet/Outlet
Syncra Silent 5.0: 1321 GPH | 12.5 Ft. Max Head | 105 Watts | 1" Inlet/Outlet
Suggested use:
Submerged Setup: Attach the rubber isolation feet, place the pump on the bottom of your chamber, adjust the front dial to your required flow rate, and plug it in.
Inline Setup: Unsnap the front flow regulator plate, thread your custom intake plumbing line directly onto the exposed male intake port, and secure your discharge hose.
Storage and safety:
Always isolate the pump from the main electrical outlet before maintaining internal parts or reaching into the water.
Regularly pull the impeller assembly out to clean away debris and clear away organic sludge.
Warnings:
Do not allow the pump to run dry or operate without water passing through the volute.
Ensure the front utility casing is securely locked in place before turning on the power.
What’s included:
1 x Sicce Syncra Silent Pump (of selected variant)
1 x Adjustable Front Intake Volume Plate
2 x Threaded Hose Barb Connectors
4 x Vibration-Isolating Rubber Cushion Feet
Why choose:
When background noise is a dealbreaker, the Italian-engineered Sicce Syncra Silent series delivers. It gives you the flexible plumbing choices, mechanical adjustments, and energy-saving performance you need, all without the noisy hum of standard utility pumps.
